Als ein Mitglied der IT-Branche, machen Sie sich noch Sorgen um die IT-Zertifizierungsprüfungen?Es ist nicht so leicht, die IT-Zertifizierungsprüfung, die Ihre relevanten Fachkenntnisse und Erfahrungen überprüft, zu bestehen. Für die Kandidaten, die sich erstmal an der IT-Zertifizierungsprüfung beteiligen, ist ein zielgerichtetes Schulungsprogramm von großer Notwendigkeit. Pass4Test steht den Kandidaten die zielgerichteten Programme, die Simulationsprüfung, zielgerichtete Lernkurse und die Prüfungsfragen und Antworten, die 95% der realen Prüfung ähnlich sind, zur Verfügung. Schicken Sie doch schnell Pass4Test in den Warenkorb.
Pass4Test bietet verschiedene Schulungensinstrumente und Ressourcen zur Vorbereitung der HP HP2-Z12-Prüfung. Es umfasst Kurse, Praxis-Test, Test-Engine und einen Teil kostenloser PDF-Download.
Die HP HP2-Z12-Prüfung sind jedem IT-Fachmann sehr wichtig. Solange Sie das Zertifikat bekommen, werden Sie im Beruf sicher nicht aussondert. Sie werden befördert und ein höheres Gehalt beziehen. Mit diesem Zertifikat können Sie alle bekommen, was Sie wünschen. Die Schulungsunterlagen zur HP HP2-Z12-Prüfung von Pass4Test sind die Ressourcen zum Erfolg. Mit diesen Schulungsmaterialien werden Sie den Schritt zum Erfolg beschleunigen. Sie werden sicher mehr selbstbewusster.
Exam Code: HP2-Z12
Prüfungsname: Servicing HP Networking Products
Aktulisiert: 2013-10-11
Nummer: 94 Q&As
Die echten und originalen Prüfungsfragen und Antworten zu HP2-Z12 (Servicing HP Networking Products) bei Pass4Test.de wurden verfasst von unseren IT-Experten mit den Informationen von HP2-Z12 (Servicing HP Networking Products) aus dem Testcenter wie PROMETRIC oder VUE.
Wie kann man Erfolge erlangen. Es gibt nur eine Ankürzung, nämlich: die Schulungsunterlagen zur HP HP2-Z12-Prüfung von Pass4Test zu benutzen. Das ist unser Vorschlag für jeden Kandidaten. Wir hoffen, dass Sie Ihren Traum erfüllen können.
Pass4Test ist eine Website, die den Traum vielen IT-Fachleuten erfüllen kann. Wenn Sie einen IT-Traum haben, dann wählen Sie doch Pass4Test. Die Schulungsunterlagen zur HP HP2-Z12-Prüfung von Pass4Test sind von vielen IT-Fachleuten begehrt, die Ihnen helfen, die Zertifizierung zu bestehen und im Berufsleben befördert zu werden.
HP2-Z12 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/HP2-Z12.html
NO.1 Several HP A Series switches are distinguished by a dual-personality (or combo) port. What is an
accurate description of this port?
A. It can accept either Ethernet Base-T cable or fiber optic cable
B. It can accept either Ethernet Base-T cable or a small form-factor pluggable (SFP) transceiver
C. It is a pair of ports. One accepts Ethernet Base-T cable and one accepts a small form-factor pluggable
(SFP) transceiver. Both can be used simultaneously.
D. It is a pair of ports. One accepts Ethernet Base-T cable and one accepts a small form-factor pluggable
(SFP) transceiver. Only one can be used at a time.
Answer: B
HP HP2-Z12 zertifizierung HP2-Z12 prüfung HP2-Z12 zertifizierung HP2-Z12 zertifizierungsfragen
NO.2 A faulty configuration on an HP A Series switch locked a customer out of the management interface.
You bypass the configuration and gain access to the switch's CLI.Your manager asks
you to send her the configuration to examine.
What must you do?
A. Establish IP connectivity between the switch and a BackUp the Startup-Config to a TFTP Server server
and issue the backup command
B. Use the copy command to copy the configuration to your management station.
C. Establish IP connectivity between the switch and your management station and use the save
command to save the configuration.
D. Use the saved-configuration command to select the startup-config and save it out to your management
station.
Answer: A
HP HP2-Z12 HP2-Z12 originale fragen HP2-Z12
NO.3 Which switch is specifically designed for networks that require basic connectivity and have little or no IT
support?
A. fixed-port switch
B. light Layer 3 switch
C. modular switch
D. unmanaged switch
Answer: D
HP zertifizierungsfragen HP2-Z12 zertifizierung HP2-Z12 zertifizierungsantworten HP2-Z12 HP2-Z12
NO.4 Which HP E Switch Series is specifically designed to be deployed in a data center?
A. E4200vl
B. E6200yl
C. E6600
D. E8200zl
Answer: C
HP HP2-Z12 antworten HP2-Z12
NO.5 You check the startup-config on an HP A Series switch and find that the switch uses myconfig.cfg as
the main startup-config and has no backup config. What happens if you use the undo startup
savedconfiguration command?
A. The myconfig.cfg file is deleted, and the switch returns to factory default settings at the next reboot.
B. The myconfig.cfg file becomes the backup startup-config, and the switch returns to factory default
settings at the next reboot.
C. The myconfig.cfg file becomes the backup startup-config, and is booted at the next reboot unless you
set another main startup-config
D. The myconfig.cfg file is retained in the switch's memory, but the switch returns to factory default
settings at the next reboot
Answer: D
HP echte fragen HP2-Z12 prüfungsfragen HP2-Z12 prüfungsunterlagen
NO.6 How can you check the status of the ports that are providing Power over Ethernet (PoE) on an HP
E2610-PWR switch?
A. Use the Mode button to selectPoE and then view the port Link and Mode LEDs
B. Use the Port Locator button to selectPoE and then view the port Status and Link LEDs.
C. View the portPoE LED.
D. Use the switch'sPoE LED and the PoE LED for each port.
Answer: A
HP zertifizierung HP2-Z12 zertifizierungsfragen HP2-Z12 dumps HP2-Z12 HP2-Z12 prüfungsunterlagen
NO.7 Which area of the network is considered the backbone?
A. data center
B. core
C. distribution layer
D. LAN access layer
Answer: B
HP originale fragen HP2-Z12 HP2-Z12 HP2-Z12 HP2-Z12
NO.8 Which device forwards network traffic based only on Layer 2 information?
A. router
B. switch
C. hub
D. firewall
Answer: C
HP prüfungsfrage HP2-Z12 HP2-Z12 originale fragen HP2-Z12 zertifizierungsantworten HP2-Z12 prüfungsfrage
NO.9 Which HP A Series switches provide Layer 2 functionality and a Web browser interface but no CLI?
A. HP A5800 Series switches
B. HP NJ2000GIntelliJack switches
C. HP A3600-E1 Series switches
D. HP A3100 Series switches
Answer: B
HP HP2-Z12 zertifizierungsfragen HP2-Z12 HP2-Z12
NO.10 You are installing a redundant power supply in an HP E8212 zl switch. Which procedures are
recommended when installing the new power supply?(Select two.)
A. Remove the copper RFI shielding.
B. Attach the new power supply to a different AC power source than the existing power supply to provide
true redundancy.
C. Tighten the retaining screws on the new power supply until they are snug but not over-tight.
D. Connect the redundant power supply to the AC power source before installing it in the switch.
E. Remove the grounding tap from the console port before installing the power supply.
Answer: B,C
HP prüfungsfrage HP2-Z12 HP2-Z12 HP2-Z12 HP2-Z12 zertifizierungsfragen HP2-Z12 dumps
NO.11 You are troubleshooting an HP A Series switch. You attempt to log in to both the CLI and the Web
browser interface in several different ways, but you are always prompted for credentials. The customer
tells you that the person who created the passwords is no longer employed by the company. What can
you do to access the switch?
A. Use the failsafe credentials, admin for username and password for password.
B. Press the Reset and Clear buttons on the switch's front panel, holding them for at least 5 seconds, to
clear the password
C. Access the Boot ROM menu and bypass the configuration, starting the switch at factory default
settings.
D. Access the switch over a direct console connection, which always permits access without a password.
Answer: C
HP echte fragen HP2-Z12 HP2-Z12 prüfungsfrage HP2-Z12 antworten HP2-Z12 HP2-Z12 antworten
NO.12 DRAG DROP
Match the HP A Series switch user interface with the type of access that it controls.
Answer:
NO.13 You are installing an HP A Series switch that requires a backup power supply as well as extra power for
Power over Ethernet (PoE) devices. Which device should you connect to this switch?
A. RPS 1200 A
B. RPS 1000 A3
C. RPS 800 A
D. RPS500 A3
Answer: B
HP originale fragen HP2-Z12 prüfungsunterlagen HP2-Z12
NO.14 You log in to an HP A Series switch over a console session in order to establish IP connectivity
between the switch and the rest of the network. What is the minimum user privilege level needed to
complete this task?
A. Operator
B. Monitor
C. System
D. Manage
Answer: C
HP HP2-Z12 HP2-Z12 zertifizierung HP2-Z12 zertifizierungsfragen
NO.15 You are installing an SFP transceiver in an HP A Series switch's SFP port. Which steps should you
perform? (Select two.)
A. Connect the fiber optic cable to the SFP transceiver before installing the transceiver.
B. Slide the transceiver into the SFP port until the spring clips catch.
C. Rotate the clasp, if present on the front of the transceiver, until it catches the knob.
D. Press and hold the spring clips on the SFP port
E. Press and hold the release button below the SFP port.
Answer: B,C
HP HP2-Z12 HP2-Z12 zertifizierungsantworten HP2-Z12 prüfungsunterlagen HP2-Z12
NO.16 You are troubleshooting a connection on an HP A Series switch that has one LED per-port. You want to
know if the port is operating in the wrong duplex mode. How do you use the LED to obtain relevant
information?
A. Click the Mode button until the mode LED is blinkinggreenand thencheck the port LED.
B. Click the Mode button until the mode LED is yellow and thencheck the port LED.
C. Check if the port LED is blinking,which indicates its duplex status (while its color indicates speed).
D. Check the color of the port LED, which indicates its duplex status (while its blinking indicates speed).
Answer: B
HP zertifizierungsfragen HP2-Z12 HP2-Z12 HP2-Z12 prüfungsunterlagen
NO.17 The exhibit shows the Power and seven-segment LEDs of an HP A Series switch. What is the switch's
status?
Exhibit:
A. The switch has member ID 8 in the cluster.
B. The switch has member ID 8 in the cluster, but its attempt to join the cluster has failed.
C. The switch has failed the power on self test (POST) with ID 8.
D. Port number 8 has failed the switch's power on self test (POST).
Answer: C
HP zertifizierungsfragen HP2-Z12 zertifizierung HP2-Z12 dumps HP2-Z12 zertifizierungsfragen
NO.18 Which E Series switches require two power supplies to be completely operational? (Select two.)
A. HP E4200vl switch
B. HP E5406zl switch
C. HP E5412zl switch
D. HP E2900 al switch
E. HP E8212zl switch
Answer: C,E
HP prüfungsfrage HP2-Z12 HP2-Z12
NO.19 You have been sent to a customer site to check an HP E8212 zlswitch. When you arrive, you notice
that the Fault and Fan Status LEDs are flashing. What is the most likely cause of this LED behavior?
A. The cooling fan is no longer functional
B. The switch is brand new and needs to have the most current firmware installed.
C. The external power supply has failed, causing the fan to malfunction.
D. The switch has failed its self-test
Answer: C
HP HP2-Z12 HP2-Z12 antworten HP2-Z12
NO.20 You are servicing an HP A Series switch, which is currently using a file call myconfig.cfg for the
startup-config. You want to preserve your new configuration changes in the switch's startup config.
Which command should you use?
A. write memory
B. save
C. save startup.cfg
D. copy running-config startup-config
Answer: D
HP HP2-Z12 HP2-Z12 zertifizierungsantworten
Warum wählen viele Leute die Schulungsunterlagen zur HP HP2-Z12-Zertifizierungsprüfung von Pass4Test?Es gibt auch andere Websites, die Schulungsressourcen zur HP2-Z12-Zertifizierungsprüfung von Pass4Test bieten. Unser Pass4Test steht Ihnen die echten Materialien zur Verfügung. Unser Eliteteam, Zertifizierungsexperten, Techniker und berühmte Linguisten bearbeiten neuerlich die neueste HP HP2-Z12-Zertifizierungsprüfung. Deshalb klicken Sie Pass4Test Website, wenn Sie die HP HP2-Z12-Zertifizierungsprüfung bestehen wollen. Mit Pass4Test können Sie Ihren Traum Schritt für Schritt erfüllen.
没有评论:
发表评论