Unser Pass4Test ist international ganz berühmt. Die Anwendbarkeit von den Schulungsunterlagen ist sehr groß. Sie werden von den IT-Experten nach ihren Kenntnissen und Erfahrungen bearbeitet. Die Feedbacks von den Kandidaten haben sich gezeigt, dass unsere Prüdukte eher von guter Qualität sind. Wenn Sie einer der IT-Kandidaten sind, sollen Sie die Schulungsunterlagen zur EMC E20-818 Zertifizierungsprüfung von Pass4Test ohne Zweifel wählen.
Die Prüfungsfragen und Antworten von EMC Zertifizierungsprüfungen werden normalerweise von den IT-Spezialisten nach ihren Berufserfahrungen bearbeitet. So ist es auch bei Pass4Test. Die IT-Experten bieten Ihnen Prüfungsfragen und Antworten, mit deren Hilfe Sie die Prügung erfolgreich ablegen können. Die Genauigkeit von unseren Prüfungsfragen und Antworten beträgt 100%. Mit Pass4Test Produkten können Sie ganz leicht die EMC-Zertifikate bekommen, was Ihnen eine große Beförderung in der IT-Branche ist.
Es gibt eine Menge von Websites, die EMC E20-818 Zertifizierungsprüfung und andere Schulungsunterlagenbieten bieten. Aber Pass4Test ist die einzige Website, die Ihnen Schulungsunterlagen zur EMC E20-818Zertifizierungsprüfung mit hoher Qualität bieten. Unter der Anleitung und Hilfe von Pass4Test können Sie zum ersten Mal die EMC E20-818 Prüfung bestehen. Die Fragen und die Antworten von Pass4Test werden von den lebendigen IT-Experten nach ihren umfangreichen Wissen und Erfahrungen bearbeitet. Sie werden Sie sicher im IT-Bereich sehr fördern.
Exam Code: E20-818
Prüfungsname: Symmetrix Solutions Expert Exam for Implementation Engineers
Aktulisiert: 2013-11-04
Nummer: 161 Q&As
Wenn Sie finden, dass unsere E20-818 Qualitätsproblem hat oder Sie die Prüfung nicht bestanden haben, zahlen wir Ihnen bedingungslos die gesammte Summe zurück. Die Fragen und Antworten zur EMC E20-818 Zertifizierungsprüfung von Pass4Test umfassen fast alle Wissensgebiete der EMC E20-818 Zertifizierungsprüfung.
Unser Pass4Test setzt sich aus den großen Eliteteams zusammen. Wir werden Ihnen die Zertifizierungsprüfung für EMC E20-818 schnell und genau bieten und zugleich rechtzeitig die Fragen und Antworten für die EMC E20-818-Zertifizierungsprüfung erneuern und bearbeiten. Außerdem verschafft unser Pass4Test in den Zertifizierungsbranchen große Reputation. Obwohl die Chance für das Bestehen der EMC E20-818 Zertifizierungsprüfung sehr gering ist, versprechen der glaubwürdige Pass4Test Ihnen, dass Sie diese Prüfung trotz geringer Chance bestehen können.
Pass4Test ist eine Website, die den Traum vielen IT-Fachleuten erfüllen kann. Wenn Sie einen IT-Traum haben, dann wählen Sie doch Pass4Test. Die Schulungsunterlagen zur EMC E20-818-Prüfung von Pass4Test sind von vielen IT-Fachleuten begehrt, die Ihnen helfen, die Zertifizierung zu bestehen und im Berufsleben befördert zu werden.
E20-818 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/E20-818.html
NO.1 Click the Calculator icon in the upper left-hand corner.
A customer is migrating their SQL server from a NAS back end to a new RAID 1-protected Symmetrix
V-Max SE array. Perfmon was used to create a log view of an average day's activity against the database
LUN as represented in the exhibit. Unfortunately the database's data file and transaction log are located
on the same LUN. The database administrator has informed you that this database typically processes 25
GB worth of transactions over the course of their 12-hour business day.
Which discount in IOPS should be taken before determining the number of spindles required for the data
file LUN?
A.75
B.152
C.176
D.365
Answer:A
EMC E20-818 E20-818 zertifizierungsfragen E20-818 E20-818 originale fragen
NO.2 A customer is planning an SRDF/Star configuration as shown in the exhibit. The customer wants to
switch production to the synchronous target in the event of a workload site fault.
In addition to the Base and SRDF Solutions Enabler licenses, which licenses are recommended at the
synchronous target?
A.TimeFinder/Clone and TimeFinder/CG
B.TimeFinder/Mirror and TimeFinder/Clone
C.TimeFinder/Snap and TimeFinder/CG
D.TimeFinder/Snap and TimeFinder/Mirror
Answer:A
EMC prüfungsunterlagen E20-818 E20-818 exam fragen E20-818 testantworten
NO.3 A customer has implemented Microsoft Exchange Server 2007 in an SRDF environment with replicas
being taken at the disaster recovery (DR) site. During testing of this solution, they have failed over
Exchange operations to the DR site. The Exchange mailbox server appears to come online, but user
mailboxes are inaccessible. The Exchange Management Console shows all mailboxes marked with a
small red "x" over the mailbox icons.
Which course of action will resolve this issue?
A.Ensure the Exchange mailbox server at the DR site can communicate with an Active Directory Domain
Controller
B.Recover the database from the BCV copies available at the DR site
C.Ensure that the World Wide Web service on the Exchange server at the DR site has started
successfully
D.Recover the database from the remote BCV copies available at the primary site
Answer:A
EMC prüfung E20-818 zertifizierung E20-818 E20-818 prüfungsfragen E20-818
NO.4 A customer has been creating replicas of several Microsoft Exchange mailbox servers using Replication
Manager. They have recently added a new Exchange Server 2007 mailbox host to the environment.
In addition, the customer has created a scheduled job to create replicas of five storage groups in
consecutive order. Since doing so, they notice that the newly added replica jobs seem to take a very long
time to complete.
What is the source of the problem?
A.NTFS volumes containing the databases were not formatted with the correct cluster size
B.Replication Manager job should have been configured to create the replicas simultaneously
C.Latest Replication Manager Client Service Pack was not installed on the Exchange server
D.Exchange management utilities were not installed on the Replication Manager mount host
Answer:A
EMC E20-818 testantworten E20-818 exam fragen
NO.5 An Microsoft Exchange administrator has recently encountered an issue with one of the databases in
their Exchange 2007 environment. The decision was made to perform a partial restore of only the single
database.
Based on EMC and Microsoft best practice, what are the proper ordered steps needed to complete this
task?
A.1) Dismount all databases in the storage group. 2) Restore the database replica. 3) Remove the .chk
file from the system path folder. 4) Remount all databases in the storage group.
B.1) Remove the .chk file from the system path folder. 2) Dismount all databases in the storage group. 3)
Restore the database replica. 4) Remount all databases in the storage group.
C.1) Dismount all databases in the storage group. 2) Remove the .chk file from the system path folder. 3)
Restore the database replica. 4) Remount all databases in the storage group.
D.1) Dismount all databases in the storage group. 2) Remove the .chk file from the system path folder. 3)
Remount all databases in the storage group. 4) Restore the database replica.
Answer:A
EMC E20-818 zertifizierungsantworten E20-818
NO.6 A composite group spanning two Symmetrix arrays is set up to run SRDF/Star using Cascaded SRDF
as illustrated in the exhibit. What is one of the necessary conditions before the SRDF daemon at Site A
will perform an MSC cycle switch?
A.Transmit delta sets from Site B to Site C have finished
B.SDDF bitmaps have been swapped at Site A
C.Invalid track count between Sites A and C is less than 30000
D.SYMCLI_STAR_ALLOW_CASCADED_CONFIGURATION option must be enabled in the option file
Answer:A
EMC prüfung E20-818 E20-818 antworten E20-818
NO.7 A customer is running Concurrent SRDF/Star. The disaster recovery (DR) plan allows for the workload
to be switched to either the synchronous site or the asynchronous site. In addition, part of their DR plan is
to enable SRDF/Star protection once the workload site comes back online.
Which advice should be given to the customer?
A.If production fails over to the synchronous site, it is possible to run in a Star-protected configuration after
the return of the original workload site.
B.If production fails over to either the asynchronous site or synchronous site, it is not possible to run in a
Star-protected configuration from either site after the return of the original workload site.
C.If production fails over to either the asynchronous site or synchronous site, it is possible to run in a
Star-protected configuration from either site after the return of the original workload site.
D.If production fails over to the asynchronous site, it is possible to run in a Star-protected configuration
after the return of the original workload site.
Answer:A
EMC zertifizierung E20-818 prüfungsunterlagen E20-818 prüfung E20-818
NO.8 As reflected in the exhibit, a customer has a Cascaded SRDF/Star environment. Site B fails and they
undertake a reconfiguration to provide remote data protection between Sites A and C.
What is used to determine the invalid tracks that must be moved from Site A to Site C?
A.Inclusive OR of two SDDF bitmaps at Site A
B.Inclusive OR of two SDDF bitmaps at Site A and a bitmap at Site C
C.Inclusive OR of two SDDF bitmaps at Site B
D.Inclusive OR of two SDDF bitmaps at Site C
Answer:A
EMC E20-818 antworten E20-818 exam fragen
NO.9 An SRDF/Star solution has been proposed. The customer is slow to accept the solution because they
are concerned about the reliability of the RDF daemon.
How would you address the customer's concern?
A.RDF daemons will be deployed on multiple management stations at the workload site. The RDF
daemons will cooperate with each other.
B.RDF daemon process runs on the Symmetrix array and has built-in redundancy.
C.RDF daemon process runs on the Symmetrix array. If the workload site RDF daemon fails, the RDF
daemon from one of the other sites will take over.
D.RDF daemons will be deployed on one management station at each of the three sites. If the workload
site RDF daemon fails, one of the RDF daemons from the other two sites will take over.
Answer:A
EMC E20-818 prüfungsfrage E20-818 originale fragen E20-818
NO.10 A customer is migrating their Microsoft Exchange 2007 server from a NAS back end to a new
Symmetrix V-Max SE array. As illustrated in the exhibit, perfmon was used to create a log view of an
average day's activity against the database LUN of the busiest datastore in the Exchange environment.
This will serve as the performance benchmark for all other database LUNs. There are an additional four
mailbox databases on this server.
How many RAID 1-protected 15k rpm spindles are required to satisfy the performance needs of the
customer for all the mailbox databases on this server?
A.10
B.26
C.38
D.50
Answer:D
EMC E20-818 dumps E20-818 prüfungsunterlagen E20-818
NO.11 A Microsoft SQL Server database administrator wants to execute backups using Solutions Enabler SRM
functionality. Which ODBC variable(s) needs to be set to enable the symioctl and symrdb command set?
A.SYMCLI_RDB "CONNECT" and "TYPE" environment variables
B.SYMCLI_RDB "NAME" and "TYPE" environment variables
C.Only the SYMCLI_RDB "Connect" to the database "username/password"
D.Only the SYMCLI_RDB "TYPE" variable to "sqlserver"
Answer:A
EMC E20-818 zertifizierungsantworten E20-818 E20-818
NO.12 A customer wants to use Replication Manager to replicate and mount, at the file group level, a Microsoft
SQL Server database. What must be done before creating a Replication Manager file group replication
job?
A.Ensure no other data files are on the same volume with the selected file group
B.Copy the log files along with the file group data files
C.Use the recover database option when mounting a file group
D.Create a TimeFinder device group that contains only the file group data files
Answer:A
EMC originale fragen E20-818 E20-818
NO.13 A customer has three data centers that are used to run SRDF/AR multi-hop on Symmetrix DMX-4
arrays.
Production is located at Site A
Secondary site is located at Site B
Tertiary site is located at Site C
In the event of a Site A failure, the customer wants to be able to fail over to Site C while retaining the
ability to have remote data protection. Which solution will offer the best RPO and RTO for this customer?
A.Cascaded SRDF
B.Latest version of SRDF/AR
C.Concurrent SRDF
D.SRDF/EDP
Answer:A
EMC zertifizierungsfragen E20-818 E20-818
NO.14 A new Cascaded SRDF customer is running in SRDF/A mode from the source (R1) site to the
disk-based secondary (R21) site. In this scenario, which SRDF mode is permitted between the R21 and
the R2 sites?
A.Adaptive Copy Disk
B.Adaptive Copy Write Pending
C.Synchronous
D.Asynchronous
Answer:A
EMC E20-818 E20-818 E20-818 zertifizierung
NO.15 In the event of a physical disk spindle failure, how would a customer with Microsoft SQL Server
maximize availability?
A.Logs should be on RAID 1 volumes with data volumes on separate RAID 6 volumes
B.Logs should be on RAID 1 volumes with data volumes on separate RAID 5 volumes
C.Logs and data files should be on separate RAID 5 volumes
D.Logs and data files should be on separate RAID 1-protected volumes
Answer:A
EMC E20-818 prüfungsfrage E20-818 testantworten E20-818 E20-818 E20-818
NO.16 Refer to the Exhibit.You have been asked to configure a Cascaded SRDF solution at a customer site.
The production site will be at Site A, the synchronous target will be at Site B, and the asynchronous target
at Site C.
Which kind of RDF devices will be needed at each site?
A.R1 at Site A, R21 at Site B, and R2 at Site C
B.R11 at Site A, R21 at Site B, and R22 at Site C
C.R11 at Site A, R21 at Site B, and R2 at Site C
D.R1 at Site A, R2 at Site B, and R21 at Site C
Answer:A
EMC E20-818 E20-818 originale fragen E20-818 E20-818 dumps
NO.17 Group Name Services (GNS) is enabled in an SRDF/Star solution. What is a benefit of GNS in a
SRDF/Star environment?
A.Facilitates management of SRDF/Star when there are multiple management hosts at each location
B.Distributes the Star internal definition file to the Symmetrix arrays at both target locations
C.Propagates the composite group definitions over SRDF links
D.Restarts the SRDF daemon in the event it stops unexpectedly
Answer:A
EMC E20-818 prüfung E20-818 prüfungsfragen E20-818 zertifizierungsantworten E20-818
NO.18 A customer wants to provide remote disaster recovery (DR) for several critical mailbox servers in their
Microsoft Exchange Server 2007 environment. Local recoverability is provided by creating replicas of their
critical databases.
The customer's DR site is located 20 km away. They have already provisioned the necessary failover host
on the DR site, as well as the required Active Directory infrastructure needed to support a failover.
However, they want to minimize the total number of database copies required to provide basic failover
capabilities for the Exchange server.
Which solution would you recommend to provide remote point-of-failure recovery with the fewest local
and remote database copies?
A.R1-R2-BCV
B.Mixed Mirroring
C.STD-R1BCV-R2-BRBCV
D.STD-R1BCV-R2
Answer:A
EMC prüfungsunterlagen E20-818 E20-818 prüfungsunterlagen E20-818
NO.19 A customer's SQL database has been experiencing performance degradation every time a particular
query is run. When designing the storage layout, all user databases were properly sized according to
EMC best practices.
Which storage configuration could be the source of the problem?
A.Tempdb and user databases are sharing spindles
B.MDF and LDF files are not sharing spindles
C.RAID 5 protection has been used for Tempdb
D.Data files are spread over striped metavolumes
Answer:A
EMC E20-818 E20-818 E20-818
NO.20 A customer wants to use TimeFinder/Exchange Integration Module (TF/EIM) to create daily local
replicas of a critical Microsoft Exchange 2007 mailbox server. Using Terminal Services, they connect
remotely to the backup server and execute the following command:
exbackup2007 -v -vss -s [servername\] -preestablish
The command runs up until the point where TF/EIM attempts to mount the volumes, then it fails. Why is
the process unable to complete?
A.Exbackup is not supported using a terminal session
B.Correct VSS Provider was not installed
C."copyonly" switch must be specified the first time a backup is run
D.Exbackup does not have the permissions needed to run on the backup host
Answer:A
EMC echte fragen E20-818 E20-818
Eine breite Vielzahl von EMC Pass4Test E20-818 Prüfung Fragen und AntwortenLogische ursprünglichen Exponate für Pass4Test E20-818 Symmetrix Solutions Expert Exam for Implementation Engineers Prüfungsfragen 100% genaue Antworten von Industrie-Experten gelöstFalls erforderlich aktualisiert EMC Pass4Test E20-818 Prüfungsfragen Pass4Test E20-818 Fragen und Antworten sind die gleichen wie sie die Real EMC Zertifizierungsprüfungen erscheinen. Viele der Pass4Test E20-818 Symmetrix Solutions Expert Exam for Implementation Engineers Prüfungsvorbereitung Antworten sind in Vielfache-Wahl-Fragen (MCQs) FormatQualität geprüften Symmetrix Solutions Expert Exam for Implementation Engineers Produkte viele Male vor der VeröffentlichungKostenlose Demo der Prüfung Pass4Test E20-818 an Pass4Test.de
没有评论:
发表评论