2014年2月11日星期二

Tibco TB0-116 Prüfung Übungen und Antworten

Die Produkte von PassTest sind für diejenigen, die sich an der Tibco TB0-116 Zertifizierungsprüfung beteiligen. Die Schulungsmaterialien von Pass4Test enthalten nicht nur Trainingsmaterialien zur Tibco TB0-116 Zertifizierungsprüfung, um Ihre Fachkenntnisse zu konsolidieren, sondern auch die genauen Prüfungsfragen und Antworten. Wir versprechen, dass Sie nur einmal die Tibco TB0-116 Zertifizierungsprüfung mit einer hohen Note bestehen können.

Mit der Entwicklung der IT-Industrie nimmt die Zahl der IT-Lerner seit Jahren immer zu. Das führt zu immer stärkerer Konkurrenzen. Und es ist undenkbar, dass Sie in IT-Industrie von anderen überschritten sind. Deshalb sollen Sie Ihre Fähigkeit ständig erhöhen und Ihre Stärke zu anderen beweisen. Wie können Sie Ihre Fähigkeit zu anderen beweisen? Immer mehr Leute wählen IT-Zertifizierungen, Ihre Fähigkeit zu beweisen. Wollen Sie auch die Zertifizierung? Kommen Sie zuerst zu Tibco TB0-116 Zertifizierungsprüfung. Das ist die wichtigste Tibco Prüfung und auch von vielen Unternehmen anerkannt.

In diesem Zeitalter des Internets gibt es viele Möglichkeiten, Tibco TB0-116 Zertifizierungsprüfung vorzubereiten. Pass4Test bietet die zuverlässigsten Schulungsfragen und Antworten, die Ihnen helfen, Tibco TB0-116 Zertifizierungsprüfung zu bestehen. Pass4Test haben eine Vielzahl von Tibco-Zertifizierungsprüfungen. Wir werden alle Ihren Wünschen über IT-Zertifizierungen erfüllen.

Egal wenn Sie Irgendwelche IT-Zertifizierungsprüfung ablegen, bieten die Prüfungsunterlagen von Pass4Test Ihnen viele Hilfen, weil Pass4Test dumps alle mögliche Fragen in den aktuellen Prüfungen und auch die ausführliche Analyse der Antworten beinhalten. Solange Sie alle Prüfungsfragen und Testantworten ernst lernen, können Sie die Prüfung sehr leichten bestehen.

Es ist keine Neuheit, dass die Schulungsunterlagen zur Tibco TB0-116 den guten Ruf von den Kandidaten gewinnen. Das heißt eben, dass die Schulungsunterlagen zur Tibco TB0-116 Zertifizierungsprüfung zuverlässig sind und den Kandidaten eher zum Bestehen der Prüfung verhelfen. Pass4Test ist immer der Best-Seller im Verleich mit den anderen Websites. Er wird von den anderen anerkannt und hat einen guten Ruf. Wenn Sie sich an der Tibco TB0-116 Zertifizierungsprüfung beteiligen wollen, wählen Sie doch Pass4Test. Sie werden sicher bekommen, was Sie wollen. Wenn Sie keine Chance verpassen, würden Sie auch nicht bereuen. Wenn Sie ein professioneller IT-Expert werden wollen, schicken Pass4Test in den Warenkorb.

Exam Code: TB0-116
Prüfungsname: TIBCO Enterprise Message Service 6 Exam
Aktulisiert: 2014-02-11
Nummer: 134 Q&As

TB0-116 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/TB0-116.html

NO.1 A TIBCO EMS Server (mystore) has the following configuration in the stores.conf and queues.conf
files: stores.conf [mystore] type=file file=mystore.db mode=sync [mystore] type=dbstore
dbstore_driver_url=jdbc:sqlserver://sqlsrv_1:3415;databaseName=sysmeta
dbstore_driver_username=admin dbstore_driver_password=admin123 queues.conf queue1
store=mystore Which statement is true when PERSISTENT messages are published to queue1?
A. The server decides at runtime which store to use.
B. The server picks themystore of file type because it was configured first.
C. The server fails to start because there are two stores configured with the same name.
D. The server picks themystore of database type because that overrides the previously configured
filestore.
Answer: C

Tibco zertifizierungsantworten   TB0-116   TB0-116 antworten   TB0-116 prüfungsunterlagen

NO.2 The mismatched bandwidth between a message producer and consumer can be solved by setting
which property in the TIBCO EMS configuration?
A. multicast
B. flow_control
C. msg_swapping
D. max_msg_memory
Answer: A

Tibco exam fragen   TB0-116   TB0-116 dumps   TB0-116   TB0-116

NO.3 Which two mappings of JMS header fields to TIBCO Rendezvous data types are correct? (Choose
two.)
A. JMSType to TIBRVMSG_U8
B. JMSTimestamp to TIBRVMSG_U64
C. JMSDeliveryMode to TIBRVMSG_U8
D. JMSRedelivered to TIBRVMSG_STRING
Answer: A,D

Tibco prüfungsfragen   TB0-116 prüfungsfragen   TB0-116 originale fragen   TB0-116 zertifizierungsantworten

NO.4 The following diagram illustrates an enterprise with one-hop zones connecting all the servers in each of
several cities in a fully-connected graph. Zone TK connects all the servers in Tokyo; zone NY connects all
the servers in New York; zone PA connects all the servers in Paris. In addition, the multi-hop zone WO
connects one server in each city. Which three statements are true when a client of server TK3 produces a
message? (Choose three.)
A. When the message reaches PA1, it crosses into zone PA.
B. When the message reaches TK1, it will cross into zone PA.
C. TK1 forwards the message to NY1, which in turn forwards it to PA1.
D. The message will travel one hop to each of the other Tokyo servers.
Answer: A,C,D

Tibco   TB0-116 originale fragen   TB0-116

NO.5 What are two allowed connection factory types with TIBCO EMS?
A. both
B. xaboth
C. generic
D. xageneric
Answer: C,D

Tibco   TB0-116   TB0-116   TB0-116 prüfungsfrage   TB0-116

NO.6 A TIBCO EMS Server has the following configuration in the stores.conf and queues.conf
files:stores.conf
[filestore-1] type=file file=filestore1.db mode=async
[filestore-2] type=file file=filestore2.db mode=sync queues.conf > store=filestore-1 queue1
store=filestore-2 Message swapping is enabled.
What happens when NON_PERSISTENT messages are published on queue1?
A. All the published messages are stored in filestore-2.
B. All the published messages are stored in filestore-1.
C. Messages are moved to filestore-1 when the server reaches certain memory limits.
D. Messages are moved to filestore-2 when the server reaches certain memory limits.
Answer: D

Tibco exam fragen   TB0-116 prüfungsunterlagen   TB0-116 zertifizierungsantworten   TB0-116

NO.7 Which two statements are true about a fault-tolerant configuration of TIBCO EMS where the primary
server heartbeat has stopped? (Choose two.)
A. The backup server waits for its activation interval.
B. The backup server tries to retrieve the information from shared storage.
C. The backup server assumes control if theft_weight parameter is equal to 1.
D. Ifft_activation = ft_heartbeat x 5, the backup server becomes the primary server.
E. Theserver_timeout_server_connection parameter is used by the backup server before
attempting a switchover.
Answer: A,B

Tibco   TB0-116 prüfungsfrage   TB0-116 echte fragen   TB0-116 prüfungsunterlagen

NO.8 Which two statements are true about access control and bridges? (Choose two.)
A. A bridge automatically has permission to send to its target destination(s).
B. Message producers must have access to a destination to send messages to that destination.
C. ACLs must be added to thebridges.conf file if the access control is enabled for any bridged destination.
D. A message producer sending messages to a bridged destination must also have access to the target
destination(s) defined on the bridge.
Answer: A,B

Tibco   TB0-116 prüfungsfragen   TB0-116   TB0-116

NO.9 What are two valid TIBCO EMS Administrator Tool commands? (Choose two.)
A. set server ft=enabled
B. set server routing=enabled
C. set server authorization=enabled
D. set serverdetailed_statistics=NONE
Answer: C,D

Tibco prüfungsfrage   TB0-116   TB0-116 zertifizierungsfragen   TB0-116   TB0-116

NO.10 Which two sets of commands successfully create a queue connection factory called fact with the URL
pointing to localhost:7222 on the TIBCO EMS Server? (Choose two.)
A. create factory fact queue
addprop factory fact url=tcp://7222
setprop factory fact url
B. create factory fact queueurl=tcp://7222
C. create factory queue fact
setprop factory fact url=tcp://localhost7222
D. create factory fact queue
addprop factory fact url=tcp://localhost:7222
E. create factory fact queue
addprop factory fact url=tcp://localhost:7222
setprop factory fact url
Answer: B,D

Tibco zertifizierungsantworten   TB0-116 echte fragen   TB0-116 prüfung   TB0-116 dumps   TB0-116 exam fragen   TB0-116

NO.11 Given the configuration in the acl.conf file: TOPIC=topic.sample1 USER=Bob PERM=subscribe
TOPIC=topic.* Group=engineering PERM=publish,subscribe Which statement is true if Bob is a member
of the engineering group?
A. Bob can only subscribe to topic.sample1.
B. Bob can publish and subscribe to only topic.sample1.
C. Bob can publish and subscribe to both topic.sample1 and topic.sample2.
D. Bob can publish to only topic.sample2 but can subscribe to both topic.sample1 and
topic.sample2.
E. Bob can publish to only topic.sample1 but can subscribe to both topic.sample1 and
topic.sample2.
Answer: C

Tibco antworten   TB0-116 echte fragen   TB0-116 prüfung   TB0-116 exam fragen

NO.12 A connection factory is configured as follows: url=tcp://A:7222,tcp://B:7222
connect_attempt_count=2 reconnect_attempt_count=4 Host A is not available. After the client connects to
host B, host B crashes and remains down. How many more times will the client try to connect with host A?
A. 0
B. 1
C. 2
D. 4
E. 6
F. 8
Answer: D

Tibco zertifizierung   TB0-116 zertifizierungsfragen   TB0-116   TB0-116

NO.13 What are two valid queue properties? (Choose two.)
A. export
B. channel
C. exclusive
D. maxRedelivery
Answer: A,B

Tibco   TB0-116 prüfungsfrage   TB0-116 originale fragen   TB0-116

NO.14 Given the following set of values: ?sess is a Session object ?dest is a Destination object ?nolocal is a
boolean variable What is the correct way to create a message consumer with a selector?
A. String selector = "JMSCorrelationID=3";
MessageConsumer consumer = sess.createConsumer(dest,selector,nolocal);
B. String selector = "JMSCorrelationID='3'";
MessageConsumer consumer = sess.createConsumer(dest,selector,nolocal);
C. String selector = "JMSCorrelationID='3'";
MessageConsumer consumer = sess.createConsumer(dest, nolocal, selector);
D. String selector = " 'JMSCorrelationID'='3'";
MessageConsumer consumer = sess.createConsumer(dest, selector, nolocal);
Answer: B

Tibco prüfungsfrage   TB0-116   TB0-116 antworten   TB0-116 zertifizierung   TB0-116 zertifizierungsfragen

NO.15 Server R defines a global queue named Q1. R is also the owner of Q1. Servers P and S define routed
queues Q1@R. The servers P, R, and S are connected by routes. Which two statements are true?
(Choose two.)
A. When a message is sent from server P to queue Q1, P forwards the message to the home queue on
server R.
B. Messages are available to local and remote consumers even before the message reaches the home
queue.
C. If Server P or the route connection from P to R fails, a consumer application of server P will not be able
to receive messages from Q1 until the servers resume communication.
D. When a message is sent from server S to Q1 and the route is not connected, the message is not
delivered, and the client application receives the exception DESTINATION_NOT_AVAILABLE.
Answer: A,C

Tibco   TB0-116   TB0-116

NO.16 Which two statements are true about JMS local transactions? (Choose two.)
A. Closing a transacted session commits its transaction.
B. Session interface provides commit and rollback methods.
C. Consumed messages are acknowledged uponsession.commit.
D. Consumed messages are recovered and redelivered uponsession.commit.
Answer: B,C

Tibco   TB0-116   TB0-116 dumps

NO.17 What action is taken when the command purge all queues foo.* is sent on the TIBCO EMS
Administrator Tool?
A. All messages in all queues are deleted.
B. All messages present in the queue called foo.* are deleted.
C. All user-created queues whose names match the pattern foo.* are deleted.
D. All messages present in all the queues whose names matched the pattern foo.* are deleted.
Answer: D

Tibco   TB0-116 dumps   TB0-116 exam fragen   TB0-116

NO.18 Which three message delivery modes are valid for TIBCO EMS? (Choose three.)
A. PERSISTANT
B. NON_PERSISTENT
C. RELIABLE_DELIVERY
D. CERTIFIED_DELIVERY
Answer: A,B,D

Tibco   TB0-116   TB0-116 prüfungsfragen   TB0-116 zertifizierungsantworten

NO.19 Which operations ensure that the user usr gets permission to only subscribe to a topic tpc and browse
the queue que?
A. add memberusr grp
grant queue que grp browse
grant topic tpc usr subscribe
B. add membergrp usr
grant queue que usr browse
grant topic tpc grp subscribe
C. add memberusr grp
grant queue que usr browse
grant topic tpc usr subscribe
D. add membergrp usr
grant queue que usr browse
grant topic tpc grp subscribe,publish
Answer: B

Tibco   TB0-116 echte fragen   TB0-116

NO.20 Which three statements are true about using Third-Party JNDI Naming/Directory Services with TIBCO
EMS? (Choose three.)
A. Destinations cannot be retrieved from third-party naming or directory services.
B. To use a third-party directory service, you must have a JNDI provider for that specific type of service.
C. For third-party services, the only prerequisite is that the objects must have previously been stored
there.
D. EMS supports the storage and retrieval ofConnectionFactories in third-party naming or directory
services.
E. The objects physically stored by EMS coming from a third-party naming/directory service are serialized
objects.
F. The synchronization of administered objects between the EMS Server and the foreign
naming/directory services is automatic.
Answer: B,C,D

Tibco zertifizierungsfragen   TB0-116   TB0-116   TB0-116   TB0-116 antworten

Pass4Test bietet Ihnen die neusten C_TSCM52_66 exam Unterlagen und HP2-B25 pdf Fragen & Antworten mit hoher Qualität. Unser 000-400 zertifizierung und 70-487 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative 74-344 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.

Artikel Link: http://www.pass4test.de/TB0-116.html

没有评论:

发表评论