Wenn Sie einige unsererExamensübungen-und antworten für Cisco 642-883 Zertifizierungsprüfung versucht haben, dann können Sie eine Wahl darüber treffen, Pass4Test zu kaufen oder nicht. Wir werden Ihnen mit 100% Bequemlichkeit und Garantie bieten. Denken Sie bitte daran, dass nur Pass4Test Ihen zum Bestehen der Cisco 642-883 Zertifizierungsprüfung verhelfen kann.
Wenn Sie die 642-883 Zertifizierungsprüfung bestehen wollen, hier kann Pass4Test Ihr Ziel erreichen. Wir sind uns im Klar, dass Sie die die 642-883 Zertifizierungsprüfung wollen. Unser Versprechen sind die wissenschaftliche Prüfungen zur 642-883 Zertifizierungsprüfung von guter Qualität.
Vorm Kauf der Fragen zur 642-883 Zertifizierungsprüfung von Pass4Test können Sie teilweise die Fragen und Antworten kostenlos als Probe herunterladen.
Die Cisco 642-883 Zertifizierungsprüfung ist eine IT-Zertifizierung, die in der IT-Branche breite Anerkennung findet. Die Leute auf der ganzen Welt interessieren sich für die Cisco 642-883 Zertifizierungsprüfung. Denn mit dieser Zertifizierung können Sie Karriere machen und den Erfolg erzielen. Die Schulungsunterlagen zur Cisco 642-883 Zertifizierungsprüfung von Pass4Test ist immer vorrangiger als die der anderen Websites. Denn wir haben ein riesiges IT-Expertenteam. Sie erfolgen immer die neuesten Schulungsunterlagen zur Cisco 642-883 Zertifizierungsprüfung.
Machen Sie sich noch Sorgen um die Cisco 642-883 Zertifzierungsprüfung?Bemühen Sie sich noch anstrengend um die Cisco 642-883 Zertifzierungsprüfung?Wollen Sie so schnell wie mlglich die die Cisco 642-883 Zertifizierungsprüfung bestehen?Wählen Sie doch Pass4Test! Mit ihm können Sie ganz schnell Ihren Traum erfüllen.
Die Qualifikation ist nicht gleich die Fähigkeit eines Menschen. Die Qualifikation bedeutet nur, dass Sie dieses Lernerlebnis hat. Und die reale Fähigkeit sind in der Ppraxis entstanden. Sie hat keine direkte Verbindung mit der Qualifikation. Sie sollen niemals das Gefühl haben, dass Sie nicht exzellent ist. Sie sollen auch nie an Ihrer Fähigkeit zweifeln. Wenn Sie die Cisco 642-883-Prüfung wählen, sollen Sie sich bemühen, die Prüfung zu bestehen. Wenn Sie sich fürchten, die Prüfung nicht bestehen zu können, wählen Sie doch die Sulungsunterlagen zur Cisco 642-883-Prüfung von Pass4Test. Egal ob welche Qualifikation haben, können Sie ganz einfach die Inhalte der Schulungsunterlagen verstehen und die Prüfung erfolgreich abschließen.
Exam Code: 642-883
Prüfungsname: Deploying Cisco Service Provider Network Routing (SPROUTE)
Aktulisiert: 2013-09-11
Nummer: 82 Q&As
642-883 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/642-883.html
NO.1 Refer to the OSPF command exhibit.
Which effect does the no-summary command option have?
A. It will cause area 1 to be able to receive non-summarized inter-area routes.
B. It will cause area 1 to not receive any inter-area routes and will use a default route to reach networks in
other areas.
C. It will cause area 1 to not receive any external routes and will use a default route to reach the external
networks.
D. It will convert the NSSA area into a NSSA totally stubby area.
E. It will convert the stubby area into a NSSA.
F. It will disable OSPF auto-summary.
Answer: B
Cisco 642-883 zertifizierungsantworten 642-883 zertifizierungsfragen 642-883 echte fragen 642-883 testantworten
NO.2 Which four statements are correct regarding IS-IS operations? (Choose four.)
A. By default, Level 1 routers within an IS-IS area do not carry any routing information external to the area
to which they belong. They use a default route to exit the area.
B. Summarization should be configured on the Level 2 routers, which injects the Level 2 routes into Level
1.
C. IS-IS supports "route leaking" in which selected Level 2 routes can be advertised by a Level 1/Level 2
router into Level 1.
D. The IS-IS backbone is a contiguous collection of Level 1 capable routers, each of which can be in a
different area.
E. With IS-IS, an individual router is in only one area, and the border between areas is on the link that
connects two routers that are in different areas.
F. Cisco IOS XR Software supports multitopology for IPv6 IS-IS unless single topology is explicitly
configured in IPv6 address-family configuration mode.
Answer: A,C,E,F
Cisco 642-883 originale fragen 642-883 642-883
NO.3 Refer to the PE1 router routing table output exhibit.
What is causing the i su 10.1.10.0/24 [115/30] via 0.0.0.0, 00:40:34, Null0 entry on the PE1 router routing
table?
A. The PE1 router is receiving the 10.1.10.0/24 summary route from the upstream L1/L2 IS-IS router.
B. The PE1 router has been configured to summarize the 10.1.10.x/32 IS-IS routes to 10.1.10.0/24.
C. The 10.1.10.0/24 has been suppressed because IS-IS auto-summary has been disabled on the PE1
router.
D. The 10.1.10.0/24 has been suppressed because of a route policy configuration on the PE1 router.
E. The 10.1.10.0/24 has been suppressed because the more specific 10.1.10.x/32 IS-IS routes have
been configured to leak into the IS-IS non-backbone area.
Answer: B
Cisco 642-883 zertifizierung 642-883
NO.4 Which three statements are true regarding the OSPF router ID? (Choose three.)
A. The OSPF routing process chooses a router ID for itself when it starts up.
B. The router-id command is the preferred procedure to set the router ID.
C. If a loopback interface is configured, its address will always be preferred as the router ID over any
other methods.
D. After the router ID is set, it does not change, even if the interface that the router is using for the router
ID goes down. The router ID changes only if the router reloads or if the OSPF routing process restarts.
E. In OSPF version 3, the OSPF router ID uses a 128-bit number.
Answer: A,B,D
Cisco zertifizierung 642-883 642-883 antworten 642-883
NO.5 In comparing IS-IS with OSPF, a Level-1-2 IS-IS router is similar to which kind of OSPF router?
A. ASBR on a normal OSPF area
B. ASBR on NSSA
C. ABR on totally stubby OSPF area
D. ABR on stubby OSPF area
E. ABR on a normal OSPF area
Answer: C
Cisco 642-883 prüfungsfrage 642-883 zertifizierung 642-883 testantworten 642-883 prüfungsunterlagen
NO.6 On Cisco IOS XR Software, which set of commands is used to enable the gi0/0/0/1 interface for OSPF
in area 0?
A. interface gi0/0/0/0 ip address 10.1.1.1 255.255.255.0 ! router ospf 1 network 10.1.1.1 0.0.0.0 area 0
B. interface gi0/0/0/0 ip address 10.1.1.1 255.255.255.0 ! router ospf 1 network 10.1.1.1 255.255.255.255
area 0
C. router ospf 1 area 0 interface GigabitEthernet0/0/0/1
D. interface gi0/0/0/0 ip address 10.1.1.1 255.255.255.0 ip ospf 1 area 0
E. router ospf 1 address-family ipv4 unicast interface GigabitEthernet0/0/0/1 area 0
F. router ospf 1 address-family ipv4 unicast interface GigabitEthernet0/0/0/1 area 0
Answer: C
Cisco 642-883 642-883 prüfungsfragen 642-883 prüfung
NO.7 What is function of the RP/0/RSP0/CPU0:PE1(config-ospf)#distance Cisco IOS-XR command?
A. To modify the administrative distance of the OSPF routes
B. To modify the default seed metric of the OSPF external routes
C. To modify the OSPF default reference bandwidth
D. To modify the OSPF cost
Answer: A
Cisco prüfung 642-883 prüfung 642-883 dumps 642-883 testantworten 642-883
NO.8 When troubleshooting OSPF neighbor errors, which three verification steps should be considered.?
(Choose three.)
A. Verify if neighboring OSPF interfaces are configured in the same area.
B. Verify if neighboring OSPF interfaces are configured with the same OSPF process ID.
C. Verify if neighboring OSPF interfaces are configured with the same OSPF priority.
D. Verify if neighboring OSPF interfaces are configured with the same hello and dead intervals.
E. Verify if neighboring OSPF interfaces are configured with the same area type.
Answer: A,D,E
Cisco testantworten 642-883 642-883 642-883 prüfung 642-883 zertifizierung
NO.9 Which two OSPF network scenarios require OSPF virtual link configuration? (Choose two.)
A. to connect an OSPF non-backbone area to area 0 through another non-backbone area
B. to connect an NSSA area to an external routing domain
C. to connect two parts of a partitioned backbone area through a non-backbone area
D. to enable route leaking from Level 2 into Level 1
E. to enable route leaking from Level 1 into Level 2
F. to enable OSPF traffic engineering
Answer: A,C
Cisco 642-883 642-883 642-883
NO.10 When configuring IPv4 and IPv6 IS-IS routing on Cisco IOS XR routers, which three statements are
correct? (Choose three.)
A. By default, a single SPF is used for both IPv4 and IPv6, so the IPv4 and IPv6 topology should be the
same.
B. By default, the IS-IS router type is Level 1 and Level 2.
C. All IS-IS routers within the same IS-IS area must be configured with the same IS-IS routing process
instance ID.
D. By default, metric-style narrow is used.
E. By default, the IS-IS interface circuit type is Level 1 and Level 2.
F. The area IS-IS address-family configuration command is used to specify the IS-IS area address.
Answer: B,D,E
Cisco dumps 642-883 prüfungsunterlagen 642-883 zertifizierungsantworten 642-883 exam fragen
Die echten und originalen Prüfungsfragen und Antworten zu 642-883 (Deploying Cisco Service Provider Network Routing (SPROUTE) ) bei Pass4Test.de wurden verfasst von unseren IT-Experten mit den Informationen von 642-883 (Deploying Cisco Service Provider Network Routing (SPROUTE) ) aus dem Testcenter wie PROMETRIC oder VUE.
没有评论:
发表评论